1. Introduction
Previously, we have introduced the Serenity BDD framework.
In this article, we’ll introduce how to integrate Serenity BDD with Spring.
2. Maven Dependency
To enable Serenity in our Spring project, we need to add serenity-core and serenity-spring to the pom.xml:
<dependency>
<groupId>net.serenity-bdd</groupId>
<artifactId>serenity-core</artifactId>
<version>1.4.0</version>
<scope>test</scope>
</dependency>
<dependency>
<groupId>net.serenity-bdd</groupId>
<artifactId>serenity-spring</artifactId>
<version>1.4.0</version>
<scope>test</scope>
</dependency>
We also need to configure the serenity-maven-plugin, which is important for generating Serenity test reports:
<plugin>
<groupId>net.serenity-bdd.maven.plugins</groupId>
<artifactId>serenity-maven-plugin</artifactId>
<version>1.4.0</version>
<executions>
<execution>
<id>serenity-reports</id>
<phase>post-integration-test</phase>
<goals>
<goal>aggregate</goal>
</goals>
</execution>
</executions>
</plugin>
3. Spring Integration
Spring integration test needs to @RunWith SpringJUnit4ClassRunner. But we cannot use the test runner directly with Serenity, as Serenity tests need to be run by SerenityRunner.
For tests with Serenity, we can use SpringIntegrationMethodRule and SpringIntegrationClassRule to enable injection.
We’ll base our test on a simple scenario: given a number, when adding another number, then returns the sum.
3.1. SpringIntegrationMethodRule
SpringIntegrationMethodRule is a MethodRule applied to the test methods. The Spring context will be built before @Before and after @BeforeClass.
Suppose we have a property to inject in our beans:
<util:properties id="props">
<prop key="adder">4</prop>
</util:properties>
Now let’s add SpringIntegrationMethodRule to enable the value injection in our test:
@RunWith(SerenityRunner.class)
@ContextConfiguration(locations = "classpath:adder-beans.xml")
public class AdderMethodRuleIntegrationTest {
@Rule
public SpringIntegrationMethodRule springMethodIntegration
= new SpringIntegrationMethodRule();
@Steps
private AdderSteps adderSteps;
@Value("#{props['adder']}")
private int adder;
@Test
public void givenNumber_whenAdd_thenSummedUp() {
adderSteps.givenNumber();
adderSteps.whenAdd(adder);
adderSteps.thenSummedUp();
}
}
It also supports method level annotations of spring test. If some test method dirties the test context, we can mark @DirtiesContext on it:
@RunWith(SerenityRunner.class)
@FixMethodOrder(MethodSorters.NAME_ASCENDING)
@ContextConfiguration(classes = AdderService.class)
public class AdderMethodDirtiesContextIntegrationTest {
@Steps private AdderServiceSteps adderServiceSteps;
@Rule public SpringIntegrationMethodRule springIntegration = new SpringIntegrationMethodRule();
@DirtiesContext
@Test
public void _0_givenNumber_whenAddAndAccumulate_thenSummedUp() {
adderServiceSteps.givenBaseAndAdder(randomInt(), randomInt());
adderServiceSteps.whenAccumulate();
adderServiceSteps.summedUp();
adderServiceSteps.whenAdd();
adderServiceSteps.sumWrong();
}
@Test
public void _1_givenNumber_whenAdd_thenSumWrong() {
adderServiceSteps.whenAdd();
adderServiceSteps.sumWrong();
}
}
In the example above, when we invoke adderServiceSteps.whenAccumulate(), the base number field of the @Service injected in adderServiceSteps will be changed:
@ContextConfiguration(classes = AdderService.class)
public class AdderServiceSteps {
@Autowired
private AdderService adderService;
private int givenNumber;
private int base;
private int sum;
public void givenBaseAndAdder(int base, int adder) {
this.base = base;
adderService.baseNum(base);
this.givenNumber = adder;
}
public void whenAdd() {
sum = adderService.add(givenNumber);
}
public void summedUp() {
assertEquals(base + givenNumber, sum);
}
public void sumWrong() {
assertNotEquals(base + givenNumber, sum);
}
public void whenAccumulate() {
sum = adderService.accumulate(givenNumber);
}
}
Specifically, we assign the sum to the base number:
@Service
public class AdderService {
private int num;
public void baseNum(int base) {
this.num = base;
}
public int currentBase() {
return num;
}
public int add(int adder) {
return this.num + adder;
}
public int accumulate(int adder) {
return this.num += adder;
}
}
In the first test _0_givenNumber_whenAddAndAccumulate_thenSummedUp, the base number is changed, making the context dirty. When we try to add another number, we won’t get an expected sum.
Notice that even if we marked the first test with @DirtiesContext, the second test is still affected: after adding, the sum is still wrong. Why?
Now, while processing method level @DirtiesContext, Serenity’s Spring integration only rebuild the test context for the current test instance. The underlying dependency context in @Steps will not be rebuilt.
To work around this problem, we can inject the @Service in our current test instance, and make service as an explicit dependency of @Steps:
@RunWith(SerenityRunner.class)
@FixMethodOrder(MethodSorters.NAME_ASCENDING)
@ContextConfiguration(classes = AdderService.class)
public class AdderMethodDirtiesContextDependencyWorkaroundIntegrationTest {
private AdderConstructorDependencySteps adderSteps;
@Autowired private AdderService adderService;
@Before
public void init() {
adderSteps = new AdderConstructorDependencySteps(adderService);
}
//...
}
public class AdderConstructorDependencySteps {
private AdderService adderService;
public AdderConstructorDependencySteps(AdderService adderService) {
this.adderService = adderService;
}
// ...
}
Or we can put the condition initialisation step in the @Before section to avoid dirty context. But this kind of solution may not be available in some complex situations.
@RunWith(SerenityRunner.class)
@FixMethodOrder(MethodSorters.NAME_ASCENDING)
@ContextConfiguration(classes = AdderService.class)
public class AdderMethodDirtiesContextInitWorkaroundIntegrationTest {
@Steps private AdderServiceSteps adderServiceSteps;
@Before
public void init() {
adderServiceSteps.givenBaseAndAdder(randomInt(), randomInt());
}
//...
}
3.2. SpringIntegrationClassRule
To enable class level annotations, we should use SpringIntegrationClassRule. Say we have the following test classes; each dirties the context:
@RunWith(SerenityRunner.class)
@ContextConfiguration(classes = AdderService.class)
public static abstract class Base {
@Steps AdderServiceSteps adderServiceSteps;
@ClassRule public static SpringIntegrationClassRule springIntegrationClassRule = new SpringIntegrationClassRule();
void whenAccumulate_thenSummedUp() {
adderServiceSteps.whenAccumulate();
adderServiceSteps.summedUp();
}
void whenAdd_thenSumWrong() {
adderServiceSteps.whenAdd();
adderServiceSteps.sumWrong();
}
void whenAdd_thenSummedUp() {
adderServiceSteps.whenAdd();
adderServiceSteps.summedUp();
}
}
@DirtiesContext(classMode = AFTER_CLASS)
public static class DirtiesContextTest extends Base {
@Test
public void givenNumber_whenAdd_thenSumWrong() {
super.whenAdd_thenSummedUp();
adderServiceSteps.givenBaseAndAdder(randomInt(), randomInt());
super.whenAccumulate_thenSummedUp();
super.whenAdd_thenSumWrong();
}
}
@DirtiesContext(classMode = AFTER_CLASS)
public static class AnotherDirtiesContextTest extends Base {
@Test
public void givenNumber_whenAdd_thenSumWrong() {
super.whenAdd_thenSummedUp();
adderServiceSteps.givenBaseAndAdder(randomInt(), randomInt());
super.whenAccumulate_thenSummedUp();
super.whenAdd_thenSumWrong();
}
}
In this example, all implicit injections will be rebuilt for class level @DirtiesContext.
3.3. SpringIntegrationSerenityRunner
There is a convenient class SpringIntegrationSerenityRunner that automatically adds both integration rules above. We can run tests above with this runner to avoid specifying the method or class test rules in our test:
@RunWith(SpringIntegrationSerenityRunner.class)
@ContextConfiguration(locations = "classpath:adder-beans.xml")
public class AdderSpringSerenityRunnerIntegrationTest {
@Steps private AdderSteps adderSteps;
@Value("#{props['adder']}") private int adder;
@Test
public void givenNumber_whenAdd_thenSummedUp() {
adderSteps.givenNumber();
adderSteps.whenAdd(adder);
adderSteps.thenSummedUp();
}
}
4. SpringMVC Integration
In cases when we only need to test SpringMVC components with Serenity, we can simply make use of RestAssuredMockMvc in rest-assured instead of the serenity-spring integration.
4.1. Maven Dependency
We need to add the rest-assured spring-mock-mvc dependency to the pom.xml:
<dependency>
<groupId>io.rest-assured</groupId>
<artifactId>spring-mock-mvc</artifactId>
<version>3.0.3</version>
<scope>test</scope>
</dependency>
4.2. RestAssuredMockMvc In Action
Let’s now test the following controller:
@RequestMapping(value = "/adder", produces = MediaType.APPLICATION_JSON_UTF8_VALUE)
@RestController
public class PlainAdderController {
private final int currentNumber = RandomUtils.nextInt();
@GetMapping("/current")
public int currentNum() {
return currentNumber;
}
@PostMapping
public int add(@RequestParam int num) {
return currentNumber + num;
}
}
We can take advantage of the MVC-mocking utilities of RestAssuredMockMvc like this:
@RunWith(SerenityRunner.class)
public class AdderMockMvcIntegrationTest {
@Before
public void init() {
RestAssuredMockMvc.standaloneSetup(new PlainAdderController());
}
@Steps AdderRestSteps steps;
@Test
public void givenNumber_whenAdd_thenSummedUp() throws Exception {
steps.givenCurrentNumber();
steps.whenAddNumber(randomInt());
steps.thenSummedUp();
}
}
Then the rest part is no different from how we use rest-assured:
public class AdderRestSteps {
private MockMvcResponse mockMvcResponse;
private int currentNum;
@Step("get the current number")
public void givenCurrentNumber() throws UnsupportedEncodingException {
currentNum = Integer.valueOf(given()
.when()
.get("/adder/current")
.mvcResult()
.getResponse()
.getContentAsString());
}
@Step("adding {0}")
public void whenAddNumber(int num) {
mockMvcResponse = given()
.queryParam("num", num)
.when()
.post("/adder");
currentNum += num;
}
@Step("got the sum")
public void thenSummedUp() {
mockMvcResponse
.then()
.statusCode(200)
.body(equalTo(currentNum + ""));
}
}
5. Serenity, JBehave, and Spring
Serenity’s Spring integration support works seamlessly with JBehave. Let’s write our test scenario as a JBehave story:
Scenario: A user can submit a number to adder and get the sum Given a number When I submit another number 5 to adder Then I get a sum of the numbers
We can implement the logics in a @Service and expose the actions via APIs:
@RequestMapping(value = "/adder", produces = MediaType.APPLICATION_JSON_UTF8_VALUE)
@RestController
public class AdderController {
private AdderService adderService;
public AdderController(AdderService adderService) {
this.adderService = adderService;
}
@GetMapping("/current")
public int currentNum() {
return adderService.currentBase();
}
@PostMapping
public int add(@RequestParam int num) {
return adderService.add(num);
}
}
Now we can build Serenity-JBehave test with the help of RestAssuredMockMvc as follows:
@ContextConfiguration(classes = {
AdderController.class, AdderService.class })
public class AdderTest extends SerenityStory {
@Autowired private AdderService adderService;
@BeforeStory
public void init() {
RestAssuredMockMvc.standaloneSetup(new AdderController(adderService));
}
}
public class AdderStory {
@Steps AdderRestSteps restSteps;
@Given("a number")
public void givenANumber() throws Exception{
restSteps.givenCurrentNumber();
}
@When("I submit another number $num to adder")
public void whenISubmitToAdderWithNumber(int num){
restSteps.whenAddNumber(num);
}
@Then("I get a sum of the numbers")
public void thenIGetTheSum(){
restSteps.thenSummedUp();
}
}
We can only mark SerenityStory with @ContextConfiguration, then Spring injection is enabled automatically. This works quite the same as the @ContextConfiguration on @Steps.
6. Summary
In this article, we covered on how to integrate Serenity BDD with Spring. The integration is not quite perfect, but it’s definitely getting there.
As always, the full implementation can be found over on the GitHub project.